Dodge Off Road

There are many track bars available for 2nd gen Dodge Rams, but none of them are perfect - until now!  The Dodge Off Road Track Bar is honestly the best track bar you can get for your 2nd gen 4x4 Ram, without a doubt.  We use a new track bar bracket that locates your track bar frame mount forward from the stock position to allow for your front axle to be pushed forward more than any other bar.  Then we found an extremely heavy duty FK heim joint to use at the frame end, and a hard rubber bushing to use at the axle end.  The greaseable bushing is very rigid and barely gives at all, but it does absorb a lot of feedback which gives you a better ride.  Both ends of the track bar are adjustable, so the Dodge Off Road Track Bar can be used on trucks with basically any lift size, as well as stock height trucks.  The bar is adjustable while mounted on the truck!  You just loosen the jam nuts and turn the bar. 

The meat of the track bar is a 1.5" OD DOM tube with a 1/4" wall for unbelieveable strength.  The bar has no bends in it so it does not deflect at all under normal circumstances, and because DOM does have some "give" to it in extreme situations, you can wheel with this track bar and not worry about bending it if you happen to hit a rock or a tree stump. 

The Dodge Off Road Track Bar can be made in custom lengths for trucks that are lifted extremely high (above 8" suspension), so send us an email and we will figure out how long your track bar needs to be.  The standard sizes are stock to 3" lift, or 4" lift to 8" lift.  Anything above 8" of suspension lift will be custom made for your truck.